Planet Networking & Communication SGS-6340-24T4S Command Manual page 743

Chapter 42 Commands for the Number Limitation
Function of MAC and IP in Port, VLAN
42.1 debug ip arp count
Command:
debug ip arp count
no debug ip arp count
Function:
When the number limitation function debug of ARP in the VLAN, if the number of dynamic ARP and the number of
ARP in the VLAN is larger than the max number allowed, users will see debug information." no debug ip arp count"
command is used to disable the number limitation function debug of ARP in the VLAN.
Parameters:
None.
Command Mode:
Admin Mode.
Default Settings:
None.
Usage Guide:
Display the debug information of the number of dynamic ARP in the VLAN.
Examples:
Switch#debug vlan mac count
%Jun 14 16:04:40 2007 Current arp count 21 is more than or equal to the maximum limit in vlan 1!!
%Jun 14 16:04:40 2007Arp learning will be stopped and some arp will be delete !!
42-191