Planet Networking & Communication SGS-6340-24T4S Command Manual page 846

Default:
32.
Usage Guide:
This command is used to prevent the exhaust attack of the dynamic binding entry for SAVI.
Example:
Set the dynamic binding number to be 5 for the same MAC address.
Switch(config)#isavi ipv6 mac-binding-limit 5
53.1.12 savi max-dad-dalay
Command:
savi max-dad-delay <max-dad-delay>
no savi max-dad-delay
Function:
Configure the dynamic binding at DETECTION state and send lifetime period of DAD NS packet detection, no
command restores the default value.
Parameter:
max-dad-delay: set the ranging between 1 and 65535 seconds, its default value is 1 second.
Command Mode:
Port Mode.
Default:
1 second.
Usage Guide:
It is recommended to use the default value.
Example:
Set the detection lifetime as 2 seconds.
Switch(config)#savi max-dad-delay 2
53-294