Planet Networking & Communication SGS-6340-24T4S Command Manual page 198

Parameters:
None.
Default:
Do not display the statistics of LLDP data packets.
Command Mode:
Admin Mode, Global Mode.
Usage Guide:
Users can check the statistics of LLDP data packets by using "show lldp traffic".
Example:
Check the statistics of LLDP data packets after LLDP is enabled on the switch.
Switch(config)#show lldp traffic
PortName Ageouts FramesDiscarded
------- ---------------
Ethernet1/1 0
FramesInErrors
-------------- -------- ---------
0 0
FramesIn FramesOut TLVsDiscarded
------------- ----------------
0 7
8-197
TLVsUnrecognized --------------
0 0