Parameter:
usage means memory use information.
Command mode:
Admin Mode
Usage Guide:
This command is used for switch debug purposes. The command will interactively prompt the user to enter start
address of the desired information in the memory and output word number. The displayed information consists of
three parts: address, Hex view of the information and character view.
Example:
Switch#show memory
start address : 0x2100
number of words[64]:
002100: 0000 0000 0000 0000 0000 0000 0000 0000
002110: 0000 0000 0000 0000 0000 0000 0000 0000
002120: 0000 0000 0000 0000 0000 0000 0000 0000
002130: 0000 0000 0000 0000 0000 0000 0000 0000
002140: 0000 0000 0000 0000 0000 0000 0000 0000
002150: 0000 0000 0000 0000 0000 0000 0000 0000
002160: 0000 0000 0000 0000 0000 0000 0000 0000
002170: 0000 0000 0000 0000 0000 0000 0000 0000
65.18 show running-config
Command:
show running-config
Function:
Display the current active configuration parameters for the switch.
Default:
If the active configuration parameters are the same as the default operating parameters, nothing will be displayed.
*................*
*................*
*................*
*................*
*................*
*................*
*................*
*................*
65-404