Planet Networking & Communication SGS-6340-24T4S Command Manual page 890

Chapter 56 IPv4 Multicast Protocol
56.1 debug ulsm event
Command:
debug ulsm event
no debug ulsm event
Function:
Show the event information of ULSM. The no operation disables showing ULSM events.
Parameter:
None.
Default:
None.
Command mode:
Admin Mode.
Usage Guide:
None.
Example:
Show the event information of ULSM.
Switch# debug ulsm event
Downlink synchoronized with ULSM group, change state to Down.
56.2 show ulsm group
Command:
show ulsm group [group-id]
Function:
Show the configuration information of ULSM group.
56-338