Planet Networking & Communication SGS-6340-24T4S Command Manual page 972

67.5 show cpu-rx protocol
Command:
show cpu-rx protocol [ <protocol-type> ]
Function:
Show the statistics of the CPU received packets of the specified protocol type.
Parameter:
<protocol- type> is the protocol type of the packets, if do not input parameters, show all statistic packets.
Command Mode:
Admin and configuration mode
Default:
None.
Usage Guide:
This command is used to debug, it is supposed to be used with the help of the technical support.
Example:
Show the statistics of CPU receiving ARP packets.
Switch#show cpu-rx protocol arp
Type
arp
Rate-limit TotPkts
500 3
CurState
allowed
68-420