Planet Networking & Communication SGS-6340-24T4S Command Manual page 729

Default:
The default maximum for retransmission is 2.
Usage Guide:
The default value is recommended in setting the EAP request/ MD5 retransmission times.
Example:
Changing the maximum retransmission times for EAP request/ MD5 frames to 5 times.
Switch(config)#dot1x max-req 5
41.13 dot1x user allow-movement
Command:
dot1x user allow-movement
no dot1x user allow-movement
Function:
Enable the authentication function after the user moves the port, the no command disables the function.
Command Mode:
Global mode
Default:
Disable the authentication function after the user moves the port.
Usage Guide:
Enable the authentication function after the user moves the port, so the switch allows user to process this
authentication. In the condition that the switch connects with hub, when the user will be moved to other port, dot1x
user allow-movement command should be enabled.
Example:
Enable the authentication function after the user moves the port.
Switch(config)#dot1x user allow-movement
41-177