Planet Networking & Communication SGS-6340-24T4S Command Manual page 715

Parameters:
<acl-name>, specific ACL name character string; <num>, specific ACL No.
Default:
None.
Command Mode:
Admin Mode
Usage Guide:
When not assigning names of ACL, all ACL will be revealed, used x time（s）indicates the times of ACL to be used.
Examples:
Switch#show access-lists
access-list 10(used 0 time(s))
access-list 10 deny any-source
access-list 100(used 1 time(s))
access-list 100 deny ip any any-destination
access-list 100 deny tcp any any-destination
access-list 1100(used 0 time(s))
access-list 1100 permit any-source-mac any-destination-mac tagged-eth2 14 2 0800
Displayed information
access-list 10(used 1 time(s))
access-list 10 deny any-source
access-list 100(used 1 time(s))
access-list 100
any-destination
access-list 100
any-destination
access-list 1100
any-destination-mac tagged-eth2 14 2 0800
deny ip any-source
deny tcp any-source
permit any-source-mac
Explanation
Number ACL10, 0 time to be used
Deny any IP packets to pass
Nnumber ACL100, 1 time to be used
Deny IP packet of any source IP address and
destination address to pass
Deny TCP packet of any source IP address and
destination address to pass
Permit tagged-eth2 with
addresses and any destination MAC addresses
and the packets whose 15th and 16th byte is
respectively 0x08 , 0x0 to pass.
40-163
any source MAC