Planet Networking & Communication SGS-6340-24T4S Command Manual page 751

42.11 show mac-address dynamic count
Command:
show mac-address dynamic count { (vlan <1-4096>)| interface ethernet <portName>}
Function:
Display the number of dynamic MAC of corresponding port and VLAN.
Parameters:
<vlan-id> display the specified VLAN ID.
<portName> is the name of layer-2 port.
Command Mode:
Any mode
Usage Guide:
Use this command to display the number of dynamic MAC of corresponding port and VLAN.
Examples:
Display the number of dynamic MAC of the port and VLAN which are configured with number limitation function of
MAC.
Switch(config)# show mac-address dynamic count interface ethernet 1/3
Port MaxCount
-----------------------------------------------------------------------------------------------------
Ethernet1/3
-----------------------------------------------------------------------------------------------------
Switch(config)# show mac-address dynamic count vlan 1
Vlan MaxCount
-----------------------------------------------------------------------------------------------------
1
-----------------------------------------------------------------------------------------------------
42.12 show nd-dynamic count
Command:
show nd-dynamic count {(vlan <1-4096>)| interface ethernet <portName>}
CurrentCount
5 1
CurrentCount
55 15
42-199