Planet Networking & Communication SGS-6340-24T4S Command Manual page 513

Example:
Set 192.168.1.0/24 as trusted IP.
Switch (config) #anti-arpscan trust ip 192.168.1.0 255.255.255.0
26.6 anti-arpscan recovery enable
Command:
anti-arpscan recovery enable
no anti-arpscan recovery enable
Function:
Enable the automatic recovery function, "no anti-arpscan recovery enable" command will disable the function.
Parameters:
None
Default Settings:
Enable the automatic recovery function
Command Mode:
Global configuration mode
User Guide:
If the users want the normal state to be recovered after a while the port is closed or the IP is disabled, they can
configure this function.
Example:
Enable the automatic recovery function of the switch.
Switch (config) #anti-arpscan recovery enable
26.7 anti-arpscan recovery time
Command:
anti-arpscan recovery time <seconds>
no anti-arpscan recovery time
26-5