Planet Networking & Communication SGS-6340-24T4S Command Manual page 664

ifname：Interface name
port-channel: ports aggregation
<1-65535>：The maximum number of groups allowed joining
<1-65535>：The maximum number of source table entries in each group, including include source and exclude
source.
replace：Replace the group and source information
drop：Drop the new group and source information
Command mode:
Global Mode.
Default:
There is no limitation as default.
Usage Guide:
When the number of the groups joined under the port or the number of sources in this group exceeds the limit, it will
be dealt according to the configured strategy. If it is drop, drop the new group and source information; if it is replace,
find a dynamic group and source from the port to conduct deleting and replacing, and then add the new group and
source information. The premise of using this command is that this VLAN is enabled IGMP Snooping function. No
command configures as "no limitation".
Example：
Switch(config)#ip igmp snooping vlan 2 interface ethernet 1/11 limit group 300 source 200 strategy replace
Switch(config)#
37.2.13 ip igmp snooping vlan mrouter-port interface
Command:
ip igmp snooping vlan <vlan-id> mrouter-port interface[<ehternet> | <port-channel>] <ifname>
no ip igmp snooping vlan <vlan-id> mrouter-port interface[<ehternet> | <port-channel>] <ifname>
Function:
Configure static mrouter port of VLAN. The no form of the command cancels this configuration.
Parameter:
vlan-id: ranging between <1-4094>
ehternet: Name of Ethernet port
37-112