Planet Networking & Communication SGS-6340-24T4S Command Manual page 609

Parameters:
(sp | sv | pv | spv), a selection from combinations of slot, port and vlan, among which sp represents slot and port, sv
represents slot and vlan, pv represents port and vlan, and spv represents slot, port and vlan.
WORD, the delimiter between slot, port and vlan which ranges among (#|.|,|;|:|/|space). Note that there're two
delimiter WORDs here, of which the former is the delimiter between slot and port while the latter is that between port
and vlan.
Default:
Null.
Command Mode:
Global configuration mode
Usage Guide:
This command has no effect on ports with self-defined subscriber-id. If a user redefines subscriber-id of the port after
configuring the command, the user-defined one prevails. This configuration is null by default.
Example:
Switch(config)# ipv6 dhcp snooping subscriber-id select sv delimiter #
34.1.19 ipv6 dhcp use class
Command:
ipv6 dhcp use class
no ipv6 dhcp use class
Function:
This command enables DHCPv6 server to support DHCPv6 class during address assignment, the no operation of
this command disables it without removing the relative DHCPv6 class information that has been configured.
Parameters:
None.
Default:
DHCPv6 server supports DHCPv6 class during address assignment.
34-57