Planet Networking & Communication SGS-6340-24T4S Command Manual page 696

Functions:
Define an extended numeric MAC ACL rule, "no access-list <num>" command deletes an extended numeric MAC
access-list rule.
Parameters:
<num> is the access-list No. which is a decimal's No. from 1100-1199; deny if rules are matching, deny access;
permit if rules are matching, permit access; <any-source-mac> any source address; <any-destination-mac> any
destination address; <host_smac>, <smac> source MAC address; <smac-mask> mask (reverse mask) of source
MAC address; <host_dmac> , <dmac> destination MAC address; <dmac-mask> mask (reverse mask) of
destination MAC address; untagged-eth2 format of untagged ethernet II packet; tagged-eth2 format of tagged
ethernet II packet; untagged-802-3 format of untagged ethernet 802.3 packet; tagged-802-3 format of tagged
ethernet 802.3 packet.
Command Mode:
Global mode
Default Configuration:
No access-list configured
Usage Guide:
When the user assign specific <num> for the first time, ACL of the serial number is created, then the lists are added
into this ACL.
Examples:
Permit tagged-eth2 with any source MAC addresses and any destination MAC addresses and the packets pass.
Switch(config)#access-list 1100 permit any-source-mac any-destination-mac tagged-eth2
40.6 access-list(mac-ip extended)
Command:
access-list<num>{deny|permit}{any-source-mac| {host-source-mac<host_smac>}|{<smac><smac-mask>}}
{any-destination-mac|{host-destination-mac <host_dmac>}|{<dmac><dmac-mask>}}icmp
{{<source><source-wildcard>}|any-source|{host-source<source-host-ip>}}
{{<destination><destination-wildcard>}|any-destination|
{host-destination<destination-host-ip>}}[<icmp-type> [<icmp-code>]] [precedence <precedence>] [tos
<tos>][time-range<time-range-name>]
access-list<num>{deny|permit}{any-source-mac| {host-source-mac<host_smac>}|{<smac><smac-mask>}}
40-144