Planet Networking & Communication SGS-6340-24T4S Command Manual page 807

Chapter 50 Commands for PPPoE Intermediate
50.1 debug pppoe intermediate agent packet {receive | send}
interface ethernet <interface-name>
Command:
debug pppoe intermediate agent packet (receive | send|) interface ethernet <interface-name>
no debug pppoe intermediate agent packet (receive | send|) interface ethernet <interface-name>
Function:
Enable PPPoE packet debug for the specified port, the no command disables it.
Parameter:
receive: Enable the debug that receive PPPoE packet.
send: Enable the debug that send PPPoE packet.
ehernet: Physical port
interface-name: Port name
Command Mode:
Admin mode
Default:
Disable PPPoE packet debug for the specified port.
Usage Guide:
Enable PPPoE packet debug for the specified port to show PPPoE packet received and sent by this port.
Example:
Enable PPPoE intermediate debug for port ethernet1/2.
Switch#debug pppoe intermediate agent packet send interface ethernet 1/2
Agent
50-255