Planet Networking & Communication SGS-6340-24T4S Command Manual page 897

Chapter 58 Commands for sFlow
58.1 sflow agent-address
Command:
sflow agent-address <agent-address>
no sflow agent-address
Function:
Configure the sFlow sample proxy address. The "no" form of this command deletes the proxy address.
Parameter:
<agent-address > is the sample proxy IP address which is shown in dotted decimal notation.
Command Mode:
Global Mode.
Default:
None default value.
Usage Guide:
The proxy address is used to mark the sample proxy which is similar to OSPF or the Router ID in the BGP. However
it is not necessary to make the sFlow sample proxy work properly.
Example:
Sample the proxy address at global mode.
switch (config)#sflow agent-address 192.168.1.200
58.2 sflow analyzer
Command:
sflow analyzer sflowtrend
no sflow analyzer sflowtrend
58-345