Planet Networking & Communication SGS-6340-24T4S Command Manual page 472

Parameter:
<value>, OSPF routing manage distance, ranging between 1~235
ROUTEPARAMETER= ospf {ROUTE1|ROUTE2|ROUTE3}.
ROUTE1= external <external-distance>, Configure the distance learnt from other routing area.
<external-distance>distance value, ranging between 1~255.
ROUTE2= inter-area <inter-distance>, configure the distance value from one area to another area.
<inter-distance> manage distance value, ranging between 1~255.
ROUTE3= intra-area <intra-distance> Configure all distance values in one area.
<intra-distance> Manage distance value, ranging between 1~255.
Default:
Default distance value is 110.
Command Mode:
OSPF protocol mode
Usage Guide:
Manage distance shows the reliability of the routing message source. The distance value may range between 1~255.
The larger the manage distance value is, the lower is its reliability.
Example:
Switch#config terminal
Switch(config)#router ospf 100
Switch(config-router)#distance ospf inter-area 20 intra-area 10 external 40
25.23 distribute-list
Command:
distribute-list <access-list-name> out {kernel |connected| static| rip| isis| bgp}
no distribute-list out {kernel |connected| static| rip| isis| bgp}
Function:
Filter network in the routing update. The "no distribute-list out {kernel |connected| static| rip| isis| bgp}"
command disables this function.
25-77