Planet Networking & Communication SGS-6340-24T4S Command Manual page 514

Function:
Configure automatic recovery time; "no anti-arpscan recovery time" command resets the automatic recovery time
to default value.
Parameters:
Automatic recovery time, in second ranging from 5 to 86400.
Default Settings:
300 seconds.
Command Mode:
Global configuration mode
User Guide:
Automatic recovery function should be enabled first.
Example:
Set the automatic recovery time as 3600 seconds.
Switch (config) #anti-arpscan recovery time 3600
26.8 anti-arpscan log enable
Command:
anti-arpscan log enable
no anti-arpscan log enable
Function:
Enable ARP scanning prevention log function; "no anti-arpscan log enable" command will disable this function.
Parameters:
None.
Default Settings:
Enable ARP scanning prevention log function.
Command Mode:
Global configuration mode
26-6