Planet Networking & Communication SGS-6340-24T4S Command Manual page 716

40.25 show access-group
Command:
show access-group in (interface {Ethernet | Ethernet IFNAME})
Functions:
Display the ACL binding status on the port.
Parameters:
IFNAME, Port name.
Default:
None.
Command Mode:
Admin and Configuration Mode.
Usage Guide:
When not assigning interface names, all ACL tied to port will be revealed.
Examples:
Switch#show access-group
interface name: Ethernet 1/1
IP Ingress access-list used is 100, traffic-statistics Disable.
interface name: Ethernet1/2
IP Ingress access-list used is 1, packet(s) number is 11110.
Displayed information
interface name: Ethernet 1/1
IP Ingress access-list used is 100
packet(s) number is 11110
Explanation
Tying situation on port Ethernet1/1
No. 100 numeric expansion ACL tied to entrance of port
Ethernet1/1
Number of packets matching this ACL rule
40-164