Planet Networking & Communication SGS-6340-24T4S Command Manual page 835

52.5 vacl mac access-group
Command:
vacl mac access-group {<700-1199> | WORD} {in } [traffic-statistic] vlan WORD
no vacl mac access-group {<700-1199> | WORD} {in } vlan WORD
Function:
This command configure VACL of MAC type on the specific VLAN.
Parameter:
<700-1199> | WORD: Configure the numeric IP ACL (include: <700-799> MAC standard access list, <1100-1199>
MAC extended access list) or the named ACL.
in : Filter the ingress traffic.
traffic-statistic: Enable the statistic of matched packets number.
vlan WORD: The VLAN will be bound to VACL.
Command mode:
Global Mode.
Default:
None.
Usage Guide:
Use ";" or "-" to input the VLAN or multi-VLANs, but do not exceed 128, and CLI length cannot exceed 80 characters.
Egress direction filtering is not supported by switch.
Example:
Configure the numeric MAC ACL for Vlan 1-5.
Switch(config)#vacl mac access-group 700 in traffic-statistic vlan 1-5
52.6 vacl mac-ip access-group
Command:
vacl mac-ip access-group {<3100-3299> | WORD} {in } [traffic-statistic] vlan WORD
no vacl mac-ip access-group {<3100-3299> | WORD} {in } vlan WORD
Function:
This command configure VACL of MAC-IP type on the specific VLAN.
52-283