Planet Networking & Communication SGS-6340-24T4S Command Manual page 537

Function:
Configures a DHCP address pool and enter the pool mode; the "no ip dhcp pool <name>"command deletes the
specified address pool.
Parameters:
<name> is the address pool name, up to 32 characters are allowed.
Command mode:
Global Mode
Usage Guide:
This command is used to configure a DHCP address pool under Global Mode and enter the DHCP address
configuration mode.
Example:
Defining an address pool named "1".
Switch(config)#ip dhcp pool 1
Switch(dhcp-1-config)#
30.1.18 ip dhcp conflict ping-detection enable
Command:
ip dhcp conflict ping-detection enable
no ip dhcp conflict ping-detection enable
Function:
Enable Ping-detection of conflict on DHCP server; the no operation of this command will disable the function.
Parameters:
None.
Default Settings:
By default, Ping-detection of conflict is disabled.
Command Mode:
Global Configuration Mode.
30-29