Rip; Global Configuration - Planet Networking & Communication GS-6320 Series User Manual

4.4.11 RIP

4.4.11.1 Global Configuration

This is RIP router configuration table. It is a general group to configure the RIP common router parameters.
The displayed settings are:
Object
• RIP Router Mode
• Vesion
• Update Timer
• Invalid Timer
User's Manual of GS-6320 and MGS-6320 Managed Switches
Description
Enable/Disable the RIP router mode.
Enable: Enable the the RIP router mode.
Disable: Disable the the RIP router mode.
RIP version support.
Default: Base on the default version process.The router sends RIPv2 and
accepts both RIPv1 and RIPv2. When the router receives either version of
REQUESTS or triggered updates packets, it replies with the appropriate version.
Version 1: Receive/Send RIPv1 only.
Version 2: Receive/Send RIPv2 only.
The timer interval (in seconds) between the router sends the complete routing
table to all neighboring RIP routers.The allowed range is 5 to 2147483.
The invalid timer is the number of seconds after which a route will be marked
invalid.The allowed range is 5 to 2147483.
300