Huawei NetEngine80E Configuration Manual - Reliability page 1200

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
Procedure
Step 1 Configure a domain mapping list on the master and slave devices.
1.
2.
3.
4.
5.
Step 2 Configure domain mapping in an RBS.
1.
2.
3.
----End
11.7.9 Checking the Configurations
After successfully configuring L2TP two-node hot backup, you can view L2TP two-node hot
backup configurations and statistics.
Context
Run the following commands to check the previous configuration.
Procedure
l
Issue 02 (2014-09-30)
Run:
system-view
The system view is displayed.
Run:
aaa
The AAA view is displayed.
Run:
domain domain-name
A domain is created.
Run:
domain-map-list domain-map-list-name
A domain mapping list is created.
Run:
domain source-domain mapping destination-domain
A domain mapping is added to the domain mapping list.
Run:
system-view
The system view is displayed.
Run:
remote-backup-service service-name
The RBS view is displayed.
Run:
domain-map-list domain-map-list-name
A domain mapping list is bound to the RBS.
Run the display remote-backup-profile [ profile-name ] command to check RBP
information.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 Multi-node Backup Configuration
1183