Configuring Multicast Two-Node Hot Backup - Huawei NetEngine80E Configuration Manual - Reliability

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
Failure ratio
Failure duration
----------------------------------------------------------
Rbs-ID
Protect-type
Tunnel-policy
Peer-ip
Vrfid
Tunnel-state
Tunnel-OperFlag: NORMAL
Spec-interface : Null
Total users
Path 1:
Run the display backup-user command to view information about backup users, including the
number of local and remote users.
<HUAWEI> display backup-user
Remote-backup-service: rbs2
Total Users Numer: 10
------------------------------------------------------------------------
100
------------------------------------------------------------------------
Local Users Number
Remote Users Number
Run the display access-user interface command to view information about the access users on
a specified interface.
<HUAWEI> display access-user interface GigabitEthernet 1/0/2.1
------------------------------------------------------------------------------
UserID
------------------------------------------------------------------------------
1
Normal users
RUI Local users
RUI Remote users
Total users

11.6 Configuring Multicast Two-node Hot Backup

Configuring multicast two-node hot backup improves reliability of networks that are
transmitting multicast services. The feature allows nonstop multicast service transmission,
which means that users do not sense a fault if there is.
Context
Issue 02 (2014-09-30)
lo metric 10
loc_vpn metric 10
nd metric 10
pd metric 10
remote_del_yyz metric 10
remotev6_yyz metric 10
:50%
:0 min
: 0
: public(lsp)
: tp1
: 10.0.0.1
: 0
: UP
: 100
Tunnel-index : 0xc000003
Out-interface : GigabitEthernet3/1/6
Vc-lable : 0
User-number : 100
101 102
Username
Vlan
user1@huawei
-/-
NOTE
The X1 and X2 models of NE80E/40Es do not support RUI; therefore, they do not support multicast two-
node hot backup.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
103 104 105
:10
:0
Interface
IPv6 address
GE1/0/2.1
-
: 0
: 1
: 0
: 1
11 Multi-node Backup Configuration
106 107 108
IP address MAC
Access type
192.168.7.199 0016-ecb7-a879
PPPoE
109
1171