Removing The Reader Cooling Fan; Scanner Drive Cable; Before Starting The Work - Canon iR7086 Series Service Manual

Chapter 5

5.4.12.3 Before Starting the Work

iR7086
1) Disconnect the 3 connectors [1].
[1]
2) Remove the upper rear cover [1].
- 3 screws [2]
[1]
3) Remove the reader rear cover [1].
- 5 screws [2]
[2]
5-36
[1]
[3] [2]
F-5-137
F-5-138
[2]
F-5-139
[1]
F-5-140

5.4.12.4 Removing the Reader Cooling Fan

iR7086
0011-8146
1) Open the wire saddle [1], and disconnect the connector [2].
2) Remove the 2 screws [3], and detach the cooling fan [4].
[2]

5.4.13 Scanner Drive Cable

5.4.13.1 Before Starting the Work
iR7105 / iR7095
1) Remove the ADF.
2) Remove the original delivery tray.
3) Remove the control panel support unit.
4) Remove the copyboard glass.
5) Remove the standard white plate.
6) Remove the upper front cover unit.
7) Remove the reader front cover.
8) Remove the reader left cover.
9) Remove the reader rear cover.
10) Remove the reader upper rear cover.
11) Remove the interface PCB cover.
12) Remove the ADF right hinge base cover [1] and the reader upper rear
right cover [2].
- 4 screws [3]
[3]
13) Shift the reader power supply cover to the front.
14) Remove the ADF right hinge base [1].
- 7 screws [2]
[2]
F-5-141
[4]
[1]
[3]
F-5-142
[2]
[1]
F-5-143
0011-9313
0011-9416
[3]