Cooling Fan; Before Removing The Cooling Fan; Removing The Cooling Fan; Scanner Drive Cable - Canon imageRUNNER 5065 series Service Manual

Chapter 5

5.4.12 Cooling Fan

5.4.12.1 Before Removing the Cooling Fan

iR5065 / iR 5055 / iR5075 / / /
1) Detach the reader rear cover. (page 10-16)Reference[Detaching the
Reader Rear Cover]

5.4.12.2 Removing the Cooling Fan

iR5065 / iR 5055 / iR5075 / / /
1) Open the wire saddle [1], and disconnect the connector [2].
2) Detach the cooling fan [4].
- 2 Screw [3]
[2] [1]

5.4.13 Scanner Drive Cable

5.4.13.1 Outline

iR5065 / iR 5055 / iR5075 / / /
Be sure to have the following nearby when replacing the scanner drive cable:
- mirror positioning tool

5.4.13.2 Before Removing the Scanner Drive Cable

iR5065 / iR 5055 / iR5075 / / /
1) Detach the copyboard glass. (page 5-17)Reference[Removing the
Copyboard Glass]
2) Detach the right cover (upper). (page 10-10)Reference[Removing the
Right Cover (Upper)]
3) Detach the reader right cover. (page 10-15)Reference[Removing the
Reader Right Cover]
4) Detach the left cover (upper). (page 10-10)Reference[Removing the
Left Cover (Upper)]
5) Detach the reader left cover. (page 10-15)Reference[Removing the
Reader Left Cover]
6) Detach the reader front cover. (page 10-15)Reference[Detaching the
Reader Front Cover]
7) Detach the reader rear cover. (page 10-16)Reference[Detaching the
Reader Rear Cover]
8) Detach the ADF.
9) Detach the control panel. (page 10-21)Reference[Removing Control
Panel]

5.4.13.3 Removing the Scanner Drive Cable

iR5065 / iR 5055 / iR5075 / / /
1) Detach the stream reading glass retainer [2].
5-24
[1]
F-5-82
[4]
[3]
F-5-83
- 2 Screw [1]
When detaching the stream reading glass retainer, be sure to take care so that
the leaf spring will not come off.
2) Remove the stream reading glass [3].
3) Detach the left glass retainer [5].
- 2 Screw [4]
[2]
0015-4846
[1]
[4]
0015-4847
- When mounting the stream reading glass retainer, be sure to hold down
both edges of the leaf spring [A] while fixing it in place. (Take care not
to bend the leaf spring.)
- Be sure to mount it while butting the stream reading glass retainer [B]
against the stream reading glass [C].
- Check to be sure that the side of the stream reading glass in contact with
the leaf spring [D] of the stream reading glass retainer.
- If not, dust can collect on the stream reading glass, causing lines in
output images.
0015-4848
0015-4849
0015-4859
[3] [4] [5]
F-5-84
[A]
F-5-85