Siemens SIMATIC BATCH Operating Manual page 623

Icons for the message status
Icon
Icons and message text for the message
Suitable symbols are shown for many message texts in the "Message" table column. This
makes it easier to assign symbols to message texts and easier to interpret messages.
Icon in mes‐
sage text
Toolbar and shortcut menu with operator functions
The operator functions on the toolbar and shortcut menu are context-sensitive. This means
that only operator functions/commands available that can actually be used for a specific
situation are enabled and offered for selection.
Icon
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Message status
Completed
Error
User intervention re‐
quired.
Aborted
Running
Note
The master server of the project is not available.
The BATCH process cell data of the connected project are currently being created,
updated, restored or compressed.
Command
Docking/undocking
Show Properties
Cancel
Note
Action completed.
1 of 1: Means that command 1 of a total of 1 has been executed.
If you select 10 objects, for example, and then use the "Release
batch" command for all objects, 10 of 10 will be displayed here
when all commands have been executed.
Error that is not or has not been corrected and is still pending.
Confirm dialog.
Actions that require user intervention in a confirmation dialog.
This applies to all actions.
Action aborted.
An aborted action will remain in the message window until it is
deleted.
0 of 1: Means that no command from a total of one command
has been executed.
Action is running.
Note
Undock: The OS control is detached from the process pic‐
ture and can be resized and positioned anywhere in the
workspace.
Dock: An undocked OS control can be reinserted back into
its original position in the process picture.
Opens a confirmation dialog when the selected messages
have the status "User action required". Or shows the error
in a dialog.
Cancels a started action. You can only use the "Cancel"
command when the message has the status "User action
required".
BATCH OS controls
11.3 Operations in process mode
623