Siemens SIMATIC BATCH Operating Manual page 373

Symbol Status
Pausing after step
paused after step
Held
Aborted
Stopped
Completed
Testing release
Release invalid
Additional status
The following symbols indicate other batch statuses in addition to those listed above. These
symbols are superimposed on the type symbol for orders.
Symbol Status
Chained
Closed
Archived
Error
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Meaning
The batch was paused, the steps cur‐
rently being executed are completed.
The batch was paused, the steps cur‐
rently being executed are completed.
The batch was held.
The batch was aborted by operator in‐
tervention. Processing can no longer
be resumed.
The Batch was stopped due to an op‐
eration. Resumption is no longer pos‐
sible
The batch was completed correctly.
After updating the process cell data,
released batches change to the "test‐
ing release" status.
After the update, the batches in the
"testing release" status are checked
automatically. If the check is success‐
ful, the batches are returned to their
original status. If the testing is unsuc‐
cessful the elements will be transfer‐
red to the status "Release invalid".
Such batches must no longer be used
and can only be deleted!
Meaning
The batch is chained with a
predecessor.
The batch is closed and can
be archived.
The batch is archived. The
batch can now be deleted.
At least one recipe phase in
the control recipe of the
batch has reported an error
or the batch control itself is
in an exceptional state.
Planning list Status list
X
X
X
X X
X X
Planning list Batch status list
X
X
X
X
BATCH Control Center
9.6 Batch Planning
Results list
X
X
X
Results list
X
X
X
X
373