Siemens SIMATIC BATCH Operating Manual page 755

● Show trends in batch reports: Specifies whether or not measurement trends are to be
displayed in the report of a batch. Measured values and trends are only available in the
batch report if the batch data management (CDV) has collected and prepared all measured
values from the PCS 7 OS. This transmission can take a few minutes.
● Show all levels in batch reports: Yes: All objects of all levels are displayed. No: In flat control
recipes, all objects of the first level (SUB, RF, ...) are displayed. In hierarchical control
recipes, all objects of the first two levels (RUP, ROP, monitoring, ...) are displayed.
Additional information about each selected report property is dynamically displayed in a text
box below.
Reporting Services
Here you make the connection settings for the "Reporting Services". The information for
"Reporting Services protocol" and "Reporting Services port" is always required. Contact your
network/database administrator. The administrator will set with the connection information for
access, for example the protocol (http/https), path (only domain name suffix) and the port
number. The following values can be set:
● Reporting Services protocol: Select the transmission protocol for access to the Microsoft
Reporting Services. The protocols "http" and "https" are available. The default setting is the
hypertext transfer protocol. The secure hypertext transfer protocol is used for encryption
and authentication of the communication between server and client.
● Reporting Services host name: Input box for entering the server suffix for access to the
Reporting Services.
● Reporting Services port: Input box for entering the port for access to the Reporting Services.
A port represents part of the network address. As default, port 80 is entered. Port 80 is a
service provider in the area of data analysis and database-based tools.
Saving the print preview
With the following properties, you set a default directory for storing reports exported as PDF
files from the print preview. You also can specify whether the file name and the directory can
be changed before saving the PDF file. Do not use local paths, instead use a UNC path.
● Default directory for PDF files: Input box for specifying a default directory in which the PDF
files generated from the print preview are saved. Use the right-hand button to open a search
dialog for selecting the required shared folder. This folder is not used for storing archived
batches.
● With the additional "Name and directory of PDF file can be changed" option, you can specify
whether or not you have the option of changing the file name and directory name before
the reports are saved. If the option is not enabled, the corresponding PDF file is saved with
a file name generated by the system in the configured directory. A part of the created file
name includes the object name you assigned in BatchCC. Note that PDF files may be
overwritten if the "Name and directory of PDF file can be changed" option is not enabled.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Context help references
14.1 Dialogs
755