Bcc Library Properties Dialog Box; General" Tab (Library Operation Properties); Allocations" Tab (Library Operation Properties) - Siemens SIMATIC BATCH Operating Manual

14.1.4

BCC Library Properties dialog box

14.1.4.1

"General" tab (Library operation properties)

Name and version
You specify the name and version of the library operation when you create a new library
operation or when you Save as.... The name cannot be modified in this tab.
Status:
The status provides you with information on the status of the library operation:
● In progress: Initial status of a newly created or copied library operation.
● Released for testing: Library operations that have been released for testing can be used
for creating a batch for test purposes.
● Released for production: This status indicates that the library operation has been tested
for normal production.
● Testing release: This status indicates that the system is currently checking for errors
following a process cell update (validation).
● Release revoked: This status indicates that the library operation must no longer be used
for new batches.
● Unknown: Status of a library operation unknown. An error may have occurred when creating
the library operation. Delete this library operation or open it again so that the library
operation changes to the "In progress" status.
Duration:
The longest time for the processing of a recipe is calculated here (usage "in progress"). It is
determined from the sum of step times through the course of the recipe, which in total equals
the greatest time. The time is entered as an empirical value in the steps. The output format is
day:hours:minutes:seconds.
Description:
You can enter an explanatory description for the library operation.
14.1.4.2

"Allocations" tab (Library operation properties)

Parameter:
● Recipe assignments: This column lists the unit recipes used in the recipe and their names.
You can enter the name of the unit recipe in the properties of the unit recipe.
● Unit class: This column shows the unit classes of the unit recipes. You can select the unit
class in the properties of the unit recipe.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Context help references
14.1 Dialogs
783