Toolbarvisible; Parameterslistcolumnorderandvisibility - Siemens SIMATIC BATCH Operating Manual

Toolbar elements
Reset step
Complete step
Set/Remove breakpoint
Acknowledge breakpoint
Hide parameter
Update
SFC visualization: Overview
SFC visualization: Pane
Open with BCC
Close
View
Use a negative or a positive value to specify whether or not the function "Undock automatically"
should be used by default. Example: If you enter the value -30 instead of the specified value
30 in the attribute for the "Undock automatically" function, the button is displayed in the OS
control as pressed, that is, the OS Control is automatically shown as undocked.
Default:
1;30;;36;37;38;39;;31;2;;3;4;5;6;;7;8;9;10;11;12;13;;14;15;25;;16;17;18;19;20;21;22;23;24;;3
4;35;;28;26;;32;33;29;;27
The attribute can be dynamized with the ToolbarOrderAndVisibility name.
11.5.3.8

ToolbarVisible

Boolean variable.
This attribute specifies whether or not the toolbar is displayed in the control.
Default: Yes, the toolbar is used and displayed.
The attribute can be dynamized with the ToolbarVisible name.
11.5.3.9

ParametersListColumnOrderAndVisibility

String.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Symbol Symbol menu
Overview
Right
Left
Top
Bottom
Above
Below
BATCH OS controls
11.5 Control properties references
Value
23
24
34
35
28
26
32
33
29
27
-
40 / -40
41 / -41
42 / -42
43 / -43
44 / -44
45 / -45
46 / -46
653