Planning Batches; How To Configure Batches - Siemens SIMATIC BATCH Operating Manual

BATCH Control Center
9.6 Batch Planning
The following can also be selected for a specific batch:
● Batch quantity
● Formula/master recipe
● Units used
● Start mode and start time
The sequence in which batches are executed can be selected by chaining the batches.
9.6.2

Planning batches

9.6.2.1

How to configure batches

You can create batches by using master recipes or formulas (with assigned master recipes).
The procedure is identical in both cases. The procedure for working with formulas is described
below.
Configuring batches
With SIMATIC BATCH, you can schedule batches and specify the chronological order of
several batches without having to release the batches immediately for production. Batches
can be derived from production orders.
The sequence shown below is the recommended order for configuring production orders with
batches in BatchCC. The diagram shows which settings must be made for batches.
348
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA