View Menu; Toolbar (View Menu); Control Bar (View Menu) - Siemens SIMATIC BATCH Operating Manual

Context help references
14.2 BCC menu commands
In such situations, you will need to use the menu command Migration > Prepare before
installing the new software version and after installing preparatory data of the new software
version.
Please see the readme file for the new SW version to determine whether preparation is
necessary. The necessary procedure for this is also described in the readme file.
14.2.6

View menu

14.2.6.1

Toolbar (View menu)

This function toggles the display of the symbol bar on (check mark) and off.
The toolbar is located below the menu bar. It contains a series of buttons that trigger the more
commonly required functions of the menu bar. In the status bar, you can see more detailed
information about the function. Click on the icon to trigger the function. Icons that cannot be
selected are displayed in gray.
You can tell which function is stored for the specific icon by placing the cursor on an icon (do
not click). A small field will be displayed with the designation.
Note
The icons can only be activated with a mouse or trackball.
14.2.6.2

Control bar (View menu)

This function toggles the display of the control bar on (check mark) and off. The control bar is
located below the menu bar.
It contains buttons with which you can control the running of a batch:
● Start:
● Pause after step:
● Hold
● Resume:
● Stop:
● Cancel:
and symbols for optimizing the screen layout in the graphic representation of the recipe of the
batch:
● Zoom in:
● Zoom out:
● Normal size:
● Area used:
Clicking the button triggers the function. Buttons that cannot be selected are displayed in gray.
1080
Start: Starts a released selected batch
Holds a batch at the end of active steps
Holds a batch and active steps
Resumes a held batch
Stops a batch
Cancels a batch
maximizes in fixed levels
minimizes in fixed levels
Switches to normal representation
Fit the recipe representation to the display area
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA