Electronic Signatures - Siemens SIMATIC BATCH Operating Manual

14.1.2.8

Electronic signatures

Introduction
This dialog provides an overview of actions that can be furnished with an electronic signature
project-wide. The entries in the list are fixed and cannot be changed or expanded.
By selecting an action and then clicking the "Edit" button, the selected action is assigned a
user role for the required electronic signature. Only then can the check box be selected or
cleared. By setting or removing the check mark in a corresponding check box, the associated
"Electronic signatures" are activated or deactivated with respect to the entire project. The
settings that you make here are not user-specific or computer-specific. In contrast to the
electronic signatures for batch elements, this setting applies centrally to all objects - on which
a corresponding action can be executed.
Layout of the tab
The dialog has a table layout with the following contents:
Table columns
Column headers
Action
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Operator action
Click on one of the column headers to
arrange the contents in ascending or de‐
scending order.
Click a check box to activate or deacti‐
vate the desired action.
Context help references
Display
To the right next to the column header
a character for "Descending" or "As‐
cending" is displayed.
The check box is selected or cleared.
14.1 Dialogs
739