Siemens SIMATIC BATCH Operating Manual page 440

BATCH Control Center
9.8 Batch control
Symbol
"Completed" status
"Unknown" status
Symbol overlaying the order folder
Operation
Error
440
Combined batch status
The symbol indicates that all batches included in the order
folder have one of the following statuses:
● Completed
● Aborted
● Stopped
● Canceled
Because all these batch statuses are to be interpreted as
completed production, the displayed symbol indicates the
end of production. As soon as new batches are created in the
folder, the symbol changes accordingly.
The symbol indicates that a time period is required to deter‐
mine the status information of all order folders. This is a tran‐
sitional status which results in one of the three statuses
above.
Extended combined batch status
Manual input by an operator is required for at least one batch
of the order.
There is an error in at least one batch of the order.
Operating Manual, 02/2016, A5E35958174-AA
SIMATIC BATCH V8.2