Merge/Compile - Siemens SIMATIC BATCH Operating Manual

Context help references
14.1 Dialogs
Start
Starts the propagate process. All batch types of the multiproject will be propagated on all
selected projects.
14.1.12.55

Merge/compile

Dialog box
All batch-relevant projects of the multiproject are displayed in this dialog. Batch-relevant
projects are those with a batch and PH process cell object. If there is no current compile in the
respective project the check box will be activated automatically in the Compile column. If the
check box is not activated then the existing unit data will be used for merging.
No longer up-to-date batch types will be updated prior to compiling. A necessary compare of
the CFC charts with the batch types will be executed automatically.
Project
Here all projects of the multiproject with a batch process cell are listed.
Note
Projects of a multiproject that have been removed for editing are indicated by a transparent
symbol. Such projects cannot be compiled because the check box is grayed out.
Include
If you want take all units in the projects into account when merging, activate the check box in
the column header. Non-activated check boxes will not be taken into consideration when
merging.
Note
If a compile of a project is required then the check box for compile will be activated
automatically.
When including projects that have been removed for editing, a copy of the last status will be
used for the merge. Note in this regard that the compile of the project that is removed for editing
may be more up to date than the copy. This status is indicated in the appropriate table cell by
a colored background.
Compile
If you want to compile all units in the projects prior to merging, activate the check box in the
column header. Non-activated check boxes will not be taken into consideration when
compiling. In this column you can also activate individual projects for the compile.
942
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA