Generate Types - Siemens SIMATIC BATCH Operating Manual

Click on the button in the column header to check all components.
Note
Components of local target systems are checked automatically.
Status
The following status displays are possible:
Check BATCH installation
Check WinCC installation
Check sharing
Unreachable
Project checked out
Not downloaded
Downloaded
No longer up-to-date
System error
Check/download OS
Start
Activates the download process.
14.1.12.53

Generate types

Dialog box
In this dialog box you start generating or importing the batch types of all included projects. The
following will be imported:
● SFC types of the category EPH or EOP
● User function blocks with the UDA "S7_tagcollect", V6-TAG_COLLECT
● BATCH interface blocks in CFC plans
If a compare should be necessary beforehand, then propagation to all relevant projects will be
executed by the system.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
There is no BATCH installation on the target computer.
There is no WinCC installation on the target computer.
The BATCH folder "sbdata" is is not correctly shared or the share
name is not "BATCH". Permissions or release name must be checked.
Remote PC station is not reachable, download is not possible.
The project with the required components is checked out.
No process cell data has been downloaded yet. The download can
be started.
Process cell data downloaded. A new download process can be trig‐
gered.
The downloaded data is no longer up-to-date. A new download proc‐
ess can be triggered.
There was a system error when downloading.
The OS has not yet been correctly downloaded.
Context help references
14.1 Dialogs
939