Wincc Archive Variable; Display" Additional Function; Computer Settings (Shortcut Menu Batch Start Coordinator) - Siemens SIMATIC BATCH Operating Manual

14.1.11.31

WinCC archive variable

Function
This dialog displays all operator stations and their WinCC archives of a single project, or in the
case of a project of a multiproject, all operator stations of all projects. By browsing in the WinCC
archives, you can select the WinCC process tag variable and assign it to the instance
parameter with the "Apply" button.
Note
If an OS with the name "wincc" is in the project then none of the available WinCC taglogging
archives will be displayed in this dialog box. Consequently in batch projects avoid using the
name "wincc".
In the multiproject the measured value is only readable on the parameter instance.
Apply
With Apply, the variable is applied and the connection of the instance parameters of the unit
with the selected measured values is executed.
14.1.11.32

"Display" additional function

Function
Use this dialog field to display all objects that use the previously selected batch type. These
can be instances, instance parameters, units, or equipment properties.
Using a filter, you can display either all attributes of a particular object or only specific attributes.
Additional functions can be:
● Opening a CFC chart
● Editing a mode of operation parameter
● Assigning a WinCC archive tag
14.1.11.33

Computer settings (shortcut menu BATCH start coordinator)

Setting the language
You select the required language for the shortcut menu and tooltip text of the BATCH Launch
Coordinator in the task bar in this dialog.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Context help references
14.1 Dialogs
855