Setting Up An Sql Server - Siemens SIMATIC BATCH Operating Manual

BATCH Control Center
9.9 Report creation and archiving of batch data
Additional information
You will find information on the security aspects and the archiving method "SQL Server" in the
sections:
● Security aspects (Page 75)
● Basic principles (Page 467)
● Setting up an SQL server (Page 470)
● Batches > Archiving > Archiving method (Page 745)
● User credentials (Page 856)
9.9.1.3

Setting up an SQL server

In order to access an SQL database, a login with access rights must be set up in the SQL
Server Management Studio.
Note
Please note that you must not use a WinCC/PH/IS SQL server instance for the archiving. Install/
use you own SQL server instance.
Procedure
1. Open the SQL Server Management Studio with the command Start > Program Files > MS
SQL Server "version" > SQL Server Management Studio and log in.
2. Log into the relevant SQL server.
3. Open the setting Security > Logins > shortcut menu > New Login.
4. In the "Login Name" input box, select the Windows user group "SIMATIC BATCH".
5. Under "Default database", select the created Batch database, for example,
SB8_2_25269528_55_Archive.
6. In the navigation window, open "User Mapping" and select your Batch database.
7. In the lower window, "Database role membership for ..." enable the access rights
"db_datareader" and "db_datawriter".
8. Save your settings with "OK".
9. In the BATCH Control Center, enter both the used SQL server instance (for example,
computer name\SBArchive).
10.In the BATCH Control Center enter any user from the Windows user group "SIMATIC
BATCH in the project settings under user information.
Result
The entered logon and password are used in the BATCH Control Center for the archive
connection to the SQL server.
470
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA