Siemens SIMATIC BATCH Operating Manual page 690

Recommended procedure
12.8 How do I configure and use dynamic unit parameters?
Description of configurations
The configurations below give you an exemplary overview of the different configuration steps
and the possible applications of your processes.
Creating an enumeration
1. Open the "Enumerations" folder in SIMATIC Manager within the "Shared Declarations" of
your project. Create a new enumeration. Example: "TA_states".
2. Create two values for the unit property "UnitState", for example, clean and dirty.
Image 12-4
690
Creating an enumeration
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA