Generating And Displaying An Info File With Individual Permissions - Siemens SIMATIC BATCH Operating Manual

Additional information
Tab "Computers and units" (Page 816)
9.2.5

Generating and displaying an info file with individual permissions

Info file with individual permissions for user roles
In the "Permission management" dialog you can click the "Generate info file" button to generate
a complete overview of the individual permissions you have configured for your user roles.
This overview can then be displayed in Windows Internet Explorer and printed.
Note
Logical dependencies between individual permissions
There are dependencies between the individual functions (and also, therefore, the
permissions) which are not supported by the software. You have the individual permission
"Edit master recipe", for example, but not the permission "Start recipe editor". Because you
do not have the permission "Start recipe editor", you cannot execute the permission "Edit
master recipe". In other words, you need both permissions to edit a master recipe.
Note
Software update, project migration with new individual permissions
Please note that when updating software and during project migration, the software does not
tell you that new roles are being added to the user management. Please check your configured
roles and make sure that you have the necessary permissions for operation in the user
management. You might need to assign a new individual permission to the corresponding role
to ensure that you retain the configured functional scope.
Structure of the info file
The SIMATIC BATCH version, the generation date of the html file, and a note about ID numbers
used which do not reference SIMATIC BATCH appear in the header.
The chapters listed in the contents are linked. You can navigate to the required chapter from
here.
All available individual permissions are displayed in the first chapter in the form of a table. All
individual permissions correspond to those listed for each role under "All functions" on the
"Individual permissions" tab in the Permission management dialog. A brief description and a
detailed description of each individual permission is provided. Please note that there may be
new individual permissions in new software versions for SIMATIC BATCH. This means that
only this generated html file always contains up-to-date individual permissions.
What do I need to remember about individual permissions with regard to the roles configured
in the project?
All individual permissions are assigned to function groups in the second chapter, "Function
groups". There are currently 10 function groups. The function groups contain the individual
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
BATCH Control Center
9.2 Specifying user permissions
287