Change Log" Dialog - Siemens SIMATIC BATCH Operating Manual

Display
By selecting or deselecting the check box, you specify which event types are displayed. The
following event types are possible:
● Errors and/or
● Warnings and/or
● Information
The system always shows all three event types. The numbers in brackets indicate the number
of objects related to the event type.
Reported errors must be eliminated otherwise the validation will not be completed successfully.
An object with errors will not be used.
Sorting and filter functions
The column contents can be sorted by clicking on the table header of any column. Below the
table headers there is also a filter function for each column. Here, enter your filter criterion so
that only the required validation messages are displayed.
Eliminating errors with a comment
For each error, the type, number, element name and a comment are shown in a table row.
The comments contain information for localizing and eliminating errors. When you select a
row, other information is displayed in the lower area. The information depends on the object
and includes, for example the date, time, ID, name, quantity information etc.
If the error is in a master recipe and the recipe editor is open, you can open the relevant master
recipe at the location of the error by double clicking on one of the error rows.
Save to file
You can save the information from the validation as a text file by clicking the "Save to file"
button.
14.1.11.3

"Change log" dialog

List of modifications
This list documents the changes made by the system administrator with date, name, action
and computer name, for example, permissions for units modified.
Data affected by the action
Detailed information on the changes, for example, the units for which the permissions were
changed.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Context help references
14.1 Dialogs
835