Used Plug-In Modules - Siemens SIMATIC BATCH Operating Manual

Context help references
14.1 Dialogs
If you use system-aided versioning , the response is as follows:
● Save: When "Saving" an element, for example, the edited recipe is overwritten with the
current name and current versions. The name and version do not change.
● Save as: With "Save as", you have the following options for an element:
– Enter a new name. The version number is set to a default version.
– Increment the major version. The major version is incremented, the minor version is
– Increment the minor version. The minor version number is incremented.
When you set the "system-aided versioning" option, you cannot rename an existing recipe,
formula or library. This function is not offered in the shortcut menu of the element.
"OK" button
Closes the dialog and saves your settings.
"Default" button
Click this button to reset all project settings you have changed in this tab to the default setting
"Yes".
"Apply" button
Saves your settings without closing the dialog.
"Cancel" button
Closes the dialog without saving your settings.
"Help" button
Opens the online help for this dialog.
14.1.2.6

Used Plug-in Modules

This dialog is relevant only if you run the validation based modules that can be created and
modified externally (plug-in modules).
Here, all the plug-in modules registered for the current project are listed regardless of whether
the module exists or functions correctly.
736
reset.
Note
With the procedure for "system-aided versioning", you have the option of circumventing
the actual restriction mechanism in the "Save" and Save as" dialogs. The "Retain version
[1.0]" or "New name with preset version [1.0]" options are offered for selection in both
dialogs.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA