Unit Selection Via Conditions For A Hierarchical Recipe - Siemens SIMATIC BATCH Operating Manual

13.Select the "Finish" button.
Result: The complete condition is entered in the "Condition" tab. Enter additional conditions
as needed in the same way.
Result: The following is displayed in the "Allocation" tab:
– Left: All units are displayed as unchangeable under "Equipment selection". The required
– Right: The union set of all selected units is displayed under "Available phases".
14.First, select the representation of the tree structure:
– Class view: All unit classes without area structure will be listed in the "Unit selection"
– Process cell complex view: All areas with the subordinate units are listed in the "Unit
15.Select the required allocation strategy and exit the dialog using the "OK" button.
16.Confirm the selection with "OK".
17.You can change these settings as needed by pressing the Edit assignment button in the
"Properties of <recipe phase>" dialog box.
See also
Process cell optimization with online assignment of a unit (Page 529)
10.4.4.5

Unit selection via conditions for a hierarchical recipe

To improve efficiency of selecting suitable units, you can define conditions on the unit. When
selecting units, all units that satisfy these conditions (union set) will then be available. Thus it
is possible, for example for process cell extensions after an update of the process cell in the
BatchCC, to also include additional units in the batch process (for batches that have not yet
been released).
Requirement
To be able to enter the conditions for the unit, the "Condition" option in the properties of the
recipe procedure must be activated for each unit recipe procedure (line). The properties dialog
in this case is expanded by a "Condition" tab.
Use the option "Unit selection through conditions" in the system settings in the Batch Control
Center to activate this option as default for all new recipes.
Possible specifications of conditions
These conditions can be created on the same recipe levels where they can be assigned to
units. When a library operation is included in a master recipe, it brings its conditions with it.
The properties dialog in this case is expanded with another "Subcondition" tab.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
units have already been selected automatically.
field.
selection" field.
BATCH Recipe Editor
10.4 Creating recipes
527