Siemens SIMATIC BATCH Operating Manual page 341

Condition of a transition has been changed.
The operator and the right value have been changed in the 3rd condition of a transition
"Trans_4". The name of the transition is located in the absolute path.
Property
Recipe_example_1
<Absolute path>
Recipe
Version
Last change
<Additional attributes>
Condition
<Absolute path>
Operator
Left value
ESIG (electronic signature)
Set check mark at global attribute "Activate".
An ESIG is displayed as inserted if the check mark is set at the global attribute "Activate" in
the property dialog of the corresponding object (recipe, recipe function, etc.) in the ESIG tab.
In addition, at least one ESIG must be configured.
Here is an example for a newly inserted ESIG for a recipe with all available recipe-specific
actions for which ESIGs are possible:
● Abort batch
● Resume batch
● Release batch
● ...
● Unlock
Property
Recipe_example_1
<Absolute path>
Recipe
Version
Last change
ESIG activated
<Additional attributes>
ESIG that are available for this recipe
Remove check mark at global attribute "Activate"
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Value (left side)
Recipe example
V1.0
08.06.2015 14:36:58 (UTC
+2:00)
...
<>
ERROR
Value (left side)
Recipe example
V1.0
08.06.2015 14:36:58 (UTC
+2:00)
No
...
BATCH Control Center
Value (right side)
Recipe example
V2.0
01.06.2015 11:06:05
(UTC +2:00)
...
=
NULL
Value (right side)
Recipe example
V2.0
01.06.2015 11:06:05
(UTC +2:00)
Yes
...
9.5 Recipes
Recipe
Condition
Recipe
ESIG
341