Siemens SIMATIC BATCH Operating Manual page 260

BATCH Control Center
9.1 Starting and operating
Example
Lists for batch planning
There are additional lists for orders and batches.
List
Order category list
Production order list
Batch planning list
260
Description
List with all order categories of the process cell.
Prior to the selection, you must select the "Orders" folder in BatchCC.
List with production orders:
● When the folder of the type "Orders" is selected, all production orders are displayed.
● When a folder of the type "Order category" is selected, only the production orders belonging
to this category are displayed.
List with all batches that are planned, released or locked. Batches can be controlled via com‐
mands in the shortcut menu for one or multiple selected batches. The status display for each
executed batch is dynamically updated.
Depending on their status, batches are moved by the system from batch planning - via batch
status - to the batch results list.
Scenario: If you start a batch from this list, it remains visible in the list and is shown with its new
status "Running". At the same time, the batch is moved to the batch status list. As soon as the
batch is completed, it is moved to the batch results list.
The content of the batch planning list is updated once you open it again, and the batch moved
to the batch status list is no longer displayed.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA