Insert (Edit Menu); Select All (Edit Menu) - Siemens SIMATIC BATCH Operating Manual

Paste (Edit menu) (Page 1107)
Delete (Edit menu) (Page 1098)
14.5.3

Insert (Edit menu)

Function
In the BATCH Recipe Editor, you can use this function to paste the content of the clipboard at
the cursor position in the recipe if there are objects (structure elements) in it.
Note
After executing this command, make sure that you click with the mouse on the target position
between two objects so that the content of the clipboard can be inserted there.
The following cannot be pasted:
● Parts of a hierarchical recipe into a flat recipe and vice versa
● Parts of a recipe phase into a recipe operation
Passed Parameters (Defer Relations)
When you insert recipe elements with passed (deferred) parameters, all parameters receive
the displayed value. No new defer relations are created. Defer relations within a copy are
retained. Transition references from the local RUP are interconnected where possible with
existing RUPs with the same unit class.
Additional information
Cut (Edit menu) (Page 1106)
Copy (Edit menu) (Page 1106)
Delete (Edit menu) (Page 1098)
14.5.4

Select all (Edit menu)

Function
In the BATCH Recipe Editor and the BATCH control, you can use this function to select all
objects (structure elements) in the recipe.
In BatchCC, you can use this function to select all objects in the detailed lists.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Context help references
14.5 BCC and RE Edit menu
1107