General" Tab (Create Order); General" Tab (Rph Unit Class Properties) - Siemens SIMATIC BATCH Operating Manual

Additional information
Process value reference, "General" tab (Recipe procedure properties) (Page 784)
14.1.9.16

"General" tab (Create order)

In this tab, you can edit the following data for a new order and edit the batches that are created
in it:
● Name: Enter an order name.
● Status:The status display is not currently used.
● Planned quantity: Planned total quantity of the order (order quantity).
● Actual quantity: The actual total quantity of the order (order quantity ) is adapted from the
number of batches and the respective batch quantity.
● Unit of measure:Unit of the product
● Earliest start and latest end of the batches:Earliest start and latest end of the batches (date,
time) of the order (optional)
● BatchesNumber of batches in this order
● Description: An explanatory text can be entered
14.1.9.17

"General" tab (RPH unit class properties)

Function:
A list box with the functions stored in basic engineering is displayed.
Unit class:
The unit class selected in the "Allocations" tab in the RUP is displayed.
Preferred unit:
The preferred unit selected in the "Allocations" tab in the RUP is displayed as the unit class.
Run time:
You can enter a time you have calculated for the processing of this function. The format is
day:hours:minutes:seconds.
Runtime scaling:
Using scaling functions (Page 579), you can influence the quantities used. Depending on the
concrete quantity for the batch, the duration of a step is corrected using the selected scaling
function. As standard, linear and quadratic scaling functions are available:
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Context help references
14.1 Dialogs
809