General" Tab (Rup Properties) - Siemens SIMATIC BATCH Operating Manual

Monitoring time
It is not possible to enter a monitoring time for the command step and the input box is always
grayed out. The execution of commands for recipe procedure elements cannot be monitored.
The command step cannot wait until all commands have executed.
Scaling the runtime
You use scaling functions (Page 579) to make processes quantity-dependent. Depending on
the specific quantity of the batch, the duration of a step is also corrected via the set scaling
function. By default, "linear" and "quadratic" scaling functions are available for selection. The
scaling involves both the runtime and monitoring time.
14.1.10.11

"General" tab (RUP properties)

Name:
You can assign a name to a recipe unit procedure.
"Execute in AS" check box
If you select the " Execute in AS" check box, the recipe logic for the selected recipe unit
procedure will be executed in the automation system. The following conditions must be met
before the check box is enabled:
● The "SIMATIC BATCH AS Execution" license must be available in the Automation License
Manager.
● For a recipe unit procedure selected in the master recipe, there must be a CFC chart with
the "UNIT_PLC" block in the unit (plant view).
● The recipe must be released for editing in the Recipe Editor.
● There must be no active structure change (OSC).
If the caution icon is shown in the dialog, one of the conditions is not met and the check box
is grayed out. If you position the mouse pointer on the caution icon, you will see a message
indicating why the check box is not enabled.
Unit class:
The unit class selected in the "Allocation" tab is displayed.
Preferred unit:
The preferred unit selected in the "Allocation" tab is displayed as the unit class.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA
Context help references
14.1 Dialogs
825