Siemens SIMATIC BATCH Operating Manual page 334

BATCH Control Center
9.5 Recipes
Interpretation rules
1. If recipe elements (RUP, ROP, simultaneous branch, alternative branch, synchronization
line, monitoring container, recipe loop, substructure) are newly added or deleted, the recipe
elements contained therein are not shown in the comparison.
2. If there are changes, additions or deletions in existing recipe elements (RUP, ROP,
simultaneous branch, alternative branch, synchronization line, monitoring container, recipe
loop, substructure, subelements), these recipe elements are shown accordingly as
changed, added or deleted in the comparison.
3. Moved recipe elements are shown as deleted in the original recipe and are shown as added
in the modified recipe.
The display of the recipe elements corresponds to the explanations in the "Basic principles of
the display and interpretation" section and is not further explained here.
Simultaneous branch
A simultaneous branch has been added.
The simultaneous branch was added. The new simultaneous branch contains three elements
in the "Recipe example - V2.0" recipe.
Property
Recipe_example_1
<absolute path>
Recipe
Version
Last change
<Additional attributes>
AND_3
<Absolute path>
Comment
Number of subelements
The number of elements in the simultaneous branch has been changed.
The simultaneous branch named "AND_3" has been changed. The simultaneous branch
contains three elements in the "Recipe example - V1.0" recipe and four elements in the "Recipe
example - V2.0" recipe.
Property
Recipe_example_1
<Absolute path>
Recipe
Version
Last change
<Additional attributes>
334
Value (left side)
Recipe example
V1.0
08.06.2015 14:36:58
(UTC +2:00)
...
Value (left side)
Recipe example
V1.0
08.06.2015 14:36:58
(UTC +2:00)
...
Value (right side)
Recipe example
V2.0
01.06.2015 11:06:05
(UTC +2:00)
...
Parallel
3
Value (right side)
Recipe example
V2.0
01.06.2015 11:06:05
(UTC +2:00)
...
Operating Manual, 02/2016, A5E35958174-AA
Recipe
Simultaneous
branch
Recipe
SIMATIC BATCH V8.2