Process Tag Types (General)" Selection, Pcc - Siemens SIMATIC BATCH Operating Manual

Context help references
14.1 Dialogs
Additional functions
Displays: All instance parameters that refer to this phase type parameter are listed in a dialog
box. Certain attributes can be selected by means of a special filter.
OK button
Saves your settings and closes the dialog.
Cancel button
Closes the dialog without saving changes.
Help button
Opens the SIMATIC BATCH online help for this context.
14.1.13.13

"Process tag types (General)" selection, PCC

Process tag types (general) selection
You have selected the "Process tag types (general)" object in the "Process Cell Data" list.
The following functions are exclusively possible with the PCC API:
● Functions such as configuring the distribution topology
● Downloading the project data
● Transferring the batch messages
● Reading/writing the EQM file
● Defining the environment variables
Display
Below a project (cardinality project/process cell = 1:1) all available batch objects (batch types
and batch instances) are displayed in the process cell tree (left side of the dialog box), and
their attributes are displayed under Properties on the right side of the dialog box.
994
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA